BONTECTV Wall Bracket, Extra Long Articulating Arm for 32-75 Inch TVs, Full Motion TV Wall Mount, Tilt, Swivel, Rotate, Universal Wall Mount, Up to 60 kg, Max VESA 600x400mm, Space Saving

Had to purchase this new wall bracket for a bigger TV (our previous one had 3 different size TV's on, in 2 different homes 🏡)This is an excellent piece of kit 👌.It was easy to fit (I watched 👀) The movement of the bracket is great, the tilt & swivel are great on this TV bracket. Works great (65" TV).Brilliant quality 👌Easy to assemble.Great value for money. Highly recommend 👌

Good quality, easy to set up.

Purchased this wall bracket for our 55inch TV. It's is very heavy duty and would take my own weight when fixed to the brick wall properly. No issues with it at all. Easy to adjust and keeps our TV off it's feet and away from the children's. Great well made bracket.

Heavy duty wall mount. Works well and is very easy to install. Just pay attention to the type of wall you mount it to. The instructions are very clear on this. Good wide range of adjustments. It a bit stiff to move. Could do with being a little easier to position. I mounted a 50 inch tv to the wall, it holds the TV very well. Good functionality with wide adjustment range. Very complete kit with lots of screws and mounting washers to suit the back of most TVs.

I was surprised at how enormous it is, it would support virtually any tv screen, but I bought it for the long reach and articulation. It is definitely overkill for tv of less than 80" plus, but I kept it because of the reach, articulation and firmness.Can't fault it as a kit because everything is provided, screws rawlplugs etc. but you will need a size 12 masonry drill to fit the wall plugs.

This is a superbly constructed TV bracket. I have a 55" Sony TV on mine and it barely deflects a millimetre at full extension. My TV is at 90 degrees to the wall and there is still at least 30cm between the side of the TV and the wall. I would guess that there would still be room if it was a 65" TV too.The hardware supplied is great. I have old flint block walls that can be granite hard and powder soft at random points. I used a 10mm masonry bit even though they were 12mm wall plugs and that worked fine. If you're confident the wall you dril into is a modern, uniform material then use a 12mm bit. Anyway, the 6 supplied bolts and washers work very well.Supplied with the bracket was the usual collection of bolts and washers for attaching your TV. It was a bonus though to have an HDMI cable and several velcro cable ties supplied too.The only issue I had was when it came to levelling the TV once in position. No matter how perfectly level you mount the bracket to the wall, the TV will always come out of level when at full extension. This is why there is a +/- 3 degree adjustment to compensate. Now, your bracket may be different, but the four Allen bolts you loosen to allow adjustment on mine were tightened in the factory to an exceptional torque rating! I'd never rounded off an Allen wrench before...I have now! Perhaps the quality of the supplied wrench was below par but, even so, my fingers had a wrench shaped indentation on them for quite a while afterwards. I had to use a Wera set I have and my cordless drill to loosen a couple that were too rounded off to do by hand. So, I suggest you loosen those 4 bolts before you've mounted it to the wall. It will save a lot of bother.In summary, then. A superb product you can trust your precious and expensive gogglebox with. Just check the torque on those bolts first. Recommended. :)

Very heavy but works well

Finally plucked up the courage to install this as not a great DIY afficionado! I really like the functionality of the arm as I am able to position the TV at 90 degrees to the wall and despite being scared the TV would fall off due to my DIY skills it feels sturdy.I did have trouble fixing the TV (a Samsung 55") to the brackets because the screws supplied weren't long enough and I ended up not using the plates or other fixings. I also ended up buying more bolts and extension/rawl plugs as I drilled the wrong size holes so the screws wouldn't fully engage. It also meant the TV was overlapping the door which was my fault- told you I wasn't god at DIY!