eSUNPLA+ Filament 1.75mm, Enhanced Toughness 3D Printer Filament PLA Plus, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Silver

Great bone colour! Strong and works fantastic at high speeds. Slowed the speed and got an absolutely flawless 7h print. Have yet to find a bad colour from eSun! Will be buying lots more

Update:Well, life pulls a bit of a prank on me yet again.As I praised this filament to high heaven, I just ran in to a problem with my recent purchase.The spool in question is quite bad in terms of how it was spooled on the drum and that it is quite damp.Constant tiny pockets on the print sides. I dried it relentlessly, but it still keeps happening.I guess the moral of the story is, that there is always a bad batch and nothing human produced can be 100% consistent in quality.So just make sure you keep an eye out for bad spools and damp filament and perhaps just send it back if this happens. Or use it for test prints where quality is not a concern.Old:Granted, I haven't tried too many filaments yet, but when I bought different brands (two times), they were nothing but disappointment.As for this? This was always perfect!Pros:- Consistent quality (never experienced any changes in it)- Good selection of colors- No tangling- No drying required (or at least I never saw any difference in print quality even after a spool was sitting out in the open for weeks, in a kitchen, in an apartment with average humidity of 65-75%).- Can be printed very nice even with low temperatures as 190-195Cons:- lighter colors seem to be more brittle. If you leave it in a position where the filament is under some bending stress, it can snap at that point after a while. This can be the case with bowden tube printers.Yes, there are cheaper alternatives, but this filament has never let me down. And why change the tried and true?I cannot recommend this enough.

This stuff is great, good bed adhesion, print is excellent quality in a tina2s.

Overall, I found it to be a good quality material. The white color of the filament was especially nice and produced clean and crisp prints.However, I did experience a few issues with the filament. At times, the material would get stuck, and I had trouble getting the roll to spin properly. This was frustrating and caused delays in my printing process.Additionally, I noticed that the color of the filament changed when it became too hot, resulting in a brownish color appearing. This was a bit disappointing, as it affected the overall appearance of my prints.Despite these issues, I still believe that the PLA+ Filament 1.75mm is a good option for those looking for a reliable and affordable filament. The white color is particularly impressive, and the material produces clean prints when it is working correctly. However, it is important to keep in mind the potential issues with the material getting stuck and the color changing when it becomes too hot.

eSUN PLA+ has been my go to filament for a long time now. I have not had a single role with an issue, the prints have always come out fantastic, I have never had any tangling or broken rolls etc. It has been nothing but smooth sailing.I have used all manner of colours of PLA+ and I have used PETG and TPU from eSUN. All of them with superb quality and performance.I will continue to use eSUN filament in all my printers.

For the price, this is a great fillament, easy to thread and get started with. I had some adhesion issues to begin with and found it did not deal well with higher temperatures. I found the best temperature range for this is 200–205 for the nozzle and 60–65 for the plate, as anything higher will just cause problems with the print and adhesion issues. Once printed, it is completely opaque and very sturdy. It does dry rather fast, which is great for faster printers; however, the spool itself also dries out fast, so if it is left overnight with no print, there is a chance the threaded fillament may break and you will have to rethread it. Otherwise, a great product.

The media could not be loaded.  Lovely red tone. Definitely red! Not orange or faded. Bought to print a Spider-Man and looks amazingGreat adhesion and strong finish.

Great filament. I was skeptical as this was the first filament ever purchased on a cardboard roll and I was worried if they skimped there they might have cheaped out on the making of it. It just printed great. No complaints. I got a smidge of warping on the large flat pieces but a brim fixed that. My fault, not the filament’s. Cranked through my Prusa MK4 consistently. Will buy again.

Colore veramente bello, ottima aderenza al piano, buona resistenza dei layer, in generale facile da stampare

Hab da nach einem schönen Rot gesucht für meinen Deadpool und ich finde das die Farbe perfekt gepasst hat. Ging sehr schön zu drucken und werde definitiv wieder, welches nachbestellen.

Printen vanaf 210 graden!

not sure what to say, its good quality and extrudes well! nice colors too!